• September 1, 2022

Swedish favourites

Exhibitor : Al-Razee Anonnya

For this second international virtual Matchboxes and Labels Exhibition organised by BML&BS, I am exhibiting some of my favourite Swedish matchbox labels.

Sweden is the country to register some pioneering contribution in the development of safety matches back in 19th century. Swedish factories produced a great many matchboxes with beautiful, colourful and amazing miniature artworks over the years. Artworks on Swedish labels are really beautiful and mesmerizing, depicting history, culture, architecture, myth and many different aspects of life in an interesting way.

I love the beautiful artworks of Swedish labels which have always worked as a stimulation for me to strive for deep study and research on the history of matchboxes, and to learn more. Therefore I love to collect Swedish labels and display some of the beautiful labels from my collection in international exhibitions.

Click on an image in the gallery below to enlarge it and see some of my favourite labels.

Matchbox and packet labels, Jönköping Westra Match Factory, 1909

Matchbox and packet labels, Jönköping Westra Match Factory

Matchbox and packet labels, Jönköping Westra Match Factory

Matchbox and packet labels, Jönköping Westra Match Factory, designed by: Fredrik Löwenadler in 1898

Matchbox and packet labels, Jönköping Westra Match Factory, designed by: Fredrik Löwenadler in 1898

Matchbox and packet labels, Jönköping Westra Match Factory

Matchbox and packet labels, Jönköping Westra Match Factory

Matchbox and packet labels, Uddevalla Match Factory, 1913

Matchbox and packet labels, Jönköping Westra Match Factory

• September 1, 2022
• No Comments
• Exhibit 2022

• September 1, 2022

Two for the price of one

Exhibitor : Phil Stringer

Several years ago I came across an interesting item on the internet by Italian artist Paolo Ulian, he had produced a match with a head at both ends allowing the same splint to be used a second time thus saving on wood.

One reviewer marvelled at this original idea commenting on why nobody had done it before, another’s more accurate comment noted that the idea was not a new one. Perhaps the modern trend towards conserving world resources means such a match should gain many plaudits.

Conserving resources was also a concern during the Second World War and the nobly named Ducal Light Co. Ltd, established in 1941, brought out their own double headed matches named “Ducal” bearing the slogan “Two For One”.

The Ducal Light Co double heads date back some 80 years but matches with two heads can be traced back to Victorian match makers who used the idea for their cigar lighting matches (typically named Vesuvians). Conserving materials may be the reason, if superior wood which would not burn through was employed, and would make particular sense where Palmer’s exotic glass stemmed “Crystal Fixed Stars” were concerned. The heads of this type of match, when finished would remain heated for a long time, this is a drawback when the match has only been used once as to place it back in the box whilst still hot could ignite the whole contents. Paolo Ulian’s box comprised a double length skillet with a normal size drawer at each end one for unused matches and one for the half used, the picture on the box denoting which end was for which, a useful idea for the old Vesuvians?

Back with savings made for the war effort, Lyons Ink Ltd (not to be confused with Lyons Tea) produced a device to get twice the light out of your match by splitting it down its length with a razor blade – enter the “Raff-Link” match doubler.

The idea was to use an old safety razor blade, which having lost the edge that would comfortably shave a man’s face, would still be very sharp. Many contraptions were designed for reusing old blades, craft knives an obvious choice, pencil sharpeners, even a wood plane.

The Raff-Link employs two blades secured into a head unit that slides along a central guide groove with a recess either side to cut two matches simultaneously. To be successful the matches have to be of relatively good quality, the stem of straight grain and a head that would not crumble.

Having tested it I found it works surprisingly well although the two halves are not always equally cut down the middle. To strike the half match a finger needs to support the head to prevent the stick from breaking. Here are some more pictures of the “Raff-Link”, click on an image to enlarge it.

Click here to return to the Exhibition Catalogue.

• September 1, 2022
• No Comments
• Exhibit 2022